Maxtor 16Channel Stand Alone DVR Manuel d'utilisateur télécharger pdf (Page 33)

3 Installation and Connections

Note: All the installation and operations here should conform to your local

electric safety rules.

3.1 Check Unpacked DVR

When you receive the DVR from the forwarding agent, please check whether there is any visible

damage. The protective materials used for the package of the DVR can protect most accidental

clashes during transportation. Then you can open the box to check the accessories.

Please check the items in accordance with the list on the warranty card (Remote control is

optional). Finally you can remove the protective film of the DVR.

Note

Remote control is not a standard accessory and it is not included in the accessory bag.

3.2 About Front Panel and Real Panel

For detailed information of the function keys in the front panel and the ports in the rear panel,

please refer to the appendix for detailed information.

The model in the front panel is very important; please check according to your purchase order.

The label in the rear panel is very important too. Usually we need you to represent the serial

number when we provide the service after sales.

3.3 HDD Installation

This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.

You can refer to the Appendix for recommended HDD brand.

Please follow the instructions listed below to install hard disk.

1. Loosen the screws of the

er cove

and side

anel.

2. Fix four screws in the HDD

(

Turn

ust three rounds

)

3. Place the HDD in accordance with

the four holes in the bottom.

4. Turn the device upside down

and then turn the screws in

firml

5. Fix the HDD firmly.

6. Connect the HDD cable and

power cable.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 158 159

Pas de commentaire

Maxtor 16Channel Stand Alone DVR Manuel d'utilisateur Page 33