Maxtor 777 W V1.0 Manuel d'instructions télécharger pdf (Page 17)

8921ADT Instruction Manual 17

Conﬁguration

If you know the maximum signal level of your audio inputs, you can enter

the value directly into the web page level adjustment ﬁelds. Refer to

Analog

Audio Inputs Page

on page 35.

For local control (no 8900NET module), you can adjust maximum input

levels by metering the corresponding output with a digital audio meter. To

correctly adjust the input levels for your digital application, use one of the

methods below:

•Apply a signal at – 1 dB below your maximum signal level to the analog

input and monitor the corresponding AES output with a meter that

indicates digital level in dBFS. Adjust each output until the meter indi-

cates – 1 dBFS.

•Apply an input audio level that is -20 dB below the maximum level,

(+4 dBu for the default, +24 dBu -20 dB = +4 dBu) and adjust the level

as indicated on a digital audio meter to -20 dBFS.

Audio Channel Pairing

The four analog input channels can be routed to any of the left and right

channel outputs of AES 1 and AES 2.

Audio Delay

The audio outputs can be delayed manually or synchronized to an external

auto-tracking input signal such as an input from an 8960DEC with 8900FSS

or 8981FS.

Each output channel can be delayed individually or locked together in two

groups, AES 1 Ch A and B, and AES 2 Ch C and D.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Pas de commentaire

Maxtor 777 W V1.0 Manuel d'instructions Page 17