Maxtor DiamondMax16 160 Manuel télécharger pdf (Page 23)

Installation

3-2 DiamondMax10 80/100/120/160/200/250/300GB AT

3.2 UNPACKING INSTRUCTIONS

1. Open the shipping container and remove the packing assembly

that contains the drive.

2. Remove the drive from the packing assembly.

3. When you are ready to install the drive, remove it from the ESD

bag.

CAUTION: The maximum limits for physical shock can be exceeded if the

drive is not handled properly. Special care should be

taken not to bump or drop the drive. It is highly recommended

that Maxtor DiamondMax10 drives are not stacked or placed on

any hard surface after they are unpacked. Such handling could

cause media damage.

CAUTION: During shipment and handling, the antistatic electrostatic dis-

charge (ESD) bag prevents electronic component

damage due to electrostatic discharge. To avoid accidental dam-

age to the drive, do not use a sharp instrument to open the ESD

bag and do not touch PCB components. Save the packing mate-

rials for possible future use.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 74 75

Pas de commentaire

Maxtor DiamondMax16 160 Manuel Page 23